WATER LEVEL CONTROLLER

SMARTTANK – Water Level Controller is mainly designed for control the water level in a water tank by controlling the pumping motor. The water tank level will be calibrated by the floatable sensor unit. Based on sensor data, pumping motor is controlled by the motor/pump control unit.

For installation of the motor/pump control unit, the users have to cut and link the motor/pump unit in between of switch and water tank motor.

SENSOR UNIT (TRANSMITTER)

Download Technical Specification

SENSOR UNIT

Ultrasonic based floatable sensor. The users have to insert the battery into the device and drop it into the water tank.

The floatable sensor measures the water level in the unit of centimeters and transmits the level data through wireless to the display unit.

The device needs 6 Numbers of AA alkaline battery, which shall last for 6 months depends on the configuration.

MOTOR/PUMP CONTROL UNIT

MOTOR / PUMP CONTROL UNIT:

SMARTTANK – Motor/Pump control unit operates on 220VAC mains with near zero installation, it will automatically control the 220V AC single phase motor/ pump as per the empty and full water level settings.

The device can work in online (with internet) and offline (without internet). In online mode the device posts seamless data and various alerts of water level to the server.

The device use can monitor one sensor unit water level of the storage tank and battery level, these parameters can also be viewed through the mobile app or through the hot spot connection of user mobile with the device.

Also, the product has motor protection mechanism against over voltage, under voltage, over current, and dry run.

MODES:

During the initial setup of users can configure the device in online or offline mode.The users have to re-configure the device after changing the previous mode. Any time the user can change these modes. With the device, users can get alert if the tank is not clean and they can check the tank leakage.

ONLINE:

The user need to have internet connection, download the android mobile app to configure the WIFI network and water level etc of this display unit. In online mode user can view the water level, battery level of senor unit, control the motor/pump from remote location.

OFFLINE:

No need to internet connection, The user can configure the motor control unit through their smart phone using the hotspot of the phone, can view the water level, battery level of senor unit, control the motor/pump within the range 5 to 10 meter of the motor/pump control unit.